made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
automatically opens and closes a self-locking geese flap 340x550 mm in a fixed frame at the poultry and geese house, aviary or small animal enclosure at dusk and / or at night.
The Poultry House Butler PHB2-RG is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
The PHB2-RG contains a temperature sensor that measures the temperature of the environment and can thus trigger various switching operations:
-When used with an indoor temperature sensor, an electric heat lamp can be switched on (if the stable temperature is too low) or a fan can be switched on for 12V DC for max. 5 hours.
230V accessories require an additional circuit breaker for mains voltage in a separate housing.
-When used with an outdoor temperature sensor, the opening of the damper can be delayed or prevented at low outdoor temperatures.
The PHB2-RG is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RG is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RG initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RG closes and opens only by timer, not by light sensor
- PHB2-RG closes and opens by light sensor only, not by time
- PHB2-RG closes and opens only by light sensor + adjustable closing time delay
- PHB2-RG closes and opens via timer and light sensor
- PHB2-RG closes and opens via timer or light sensor
- PHB2-RG closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
Fix the PSD-RG to the wall using the 4 screws supplied above the opening hole. Then make the adjustments according to the instructions >>> READY !
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2-RG with (integrated) light sensor, temperature sensor, timer and coiled pull cord
- Fixed frame with integrated self-locking geese flap 340x550 mm Dimensions of the frame: width 370 mm, length 840 mm, height 65 mm
- Power supply 230 V / 12 V DC ( Approved for indoor use! ), Ordernumber: 476
Connections for external remote display are provided!
Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:472;s:14:"products_price";s:8:"209.2437";s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0740972162909";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:13;a:17:{s:14:"products_model";s:9:"PHB2AE-RG";s:13:"products_name";s:93:"PHB2AE-RG as a frame unit with self-locking goose flap and light control, separate drive unit";s:17:"products_quantity";i:9;s:21:"products_shippingtime";i:7;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"528_0.jpg";s:15:"products_weight";s:5:"2.600";s:26:"products_short_description";s:846:"Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.
";s:20:"products_description";s:10829:"The Poultry House Butler PHB2AE-RG is equipped with sensors and control elements which allow the opening and closing of the door depending on the temperature:
- Ambient brightness (twilight switch) with adjustable closing time delay
- Time (timer) with day and weekend programme or two closing and opening times a day
- Combination of twilight sensor and timer
- via radio remote control or via GSM module with Android smartphone (both optionally available)
- integrated hand switch
Non-dimmable 230 V lighting as so-called local light, heating or fan can be connected and switched using connection modules. The opening of the flap can be prevented or delayed at low outside temperatures, a temperature sensor is available in the device or can be connected externally.
The main function of the lighting control is to provide the optimum amount of light depending on the current duration of daylight. The lighting control automatically switches on the stable lighting at a time that you can set and dims the light from 0% to 100% (sunrise) within a specified time. The barn lighting is automatically switched off when the associated light sensor detects a preset outdoor brightness. If the outdoor light brightness has already been reached before the start of dimming (summer), the dimming process is not started.
In the evening, the stall lighting is automatically switched on (100%) by the associated light sensor. The dimming process starts from 100% to 0% (sunset) depending on a time that you can set. The lighting is then switched off completely at the set time. Here, too, the lighting control only becomes active if the outside brightness falls below a preset level, i.e. in summer the dimming process is not carried out for most of the time.
Various light sources are possible as lighting sources for the stable. Dimmable LED lamps with 12V DC operating voltage from JOSTechnik can be connected directly to the lighting control system. Alternatively, the use of dimmable fluorescent lamps with electronic ballast EVG (so-called T5 tubes) is possible. This, however, requires an additional JT-Rel-Ls connection unit, which enables 230V AC devices to be used for lighting control. It is not possible to use normal incandescent lamps!
The status of the damper gate valve is displayed:
- in the device display
- red/green LED visible from a distance
- via smartphone with Android system when using the GSM module (GSM module cannot be retrofitted, but can only be installed when ordering a new GSM module)
In the PHB2AE-RG, there is a temperature sensor in the control unit that measures the temperature of the environment and can thus trigger various switching processes: Depending on the installation location, an additional external temperature sensor is required, e.g. to switch an electric heat lamp (if the stable temperature is too low) or a fan / ventilator for 12V DC for max. 5 hrs. For 230V accessories, an additional circuit breaker for mains voltage is required in a separate housing. To delay or prevent the opening of the flap at low outdoor temperatures, the outdoor temperature must be measured.
If there is an animal under the slider during the closing process, the PHB2-RH motor is automatically stopped when the slider is put on and the flap is immediately opened again. The emergency stop closing procedure is repeated 2 times automatically. The emergency stop function is deactivated on the fourth closing attempt. No animal has to free itself under the load of the flap as usual with all other manufacturers!The PHB2-RG is equipped with a multiline display which can be used to change all settings via a multilingual menu at the touch of a button. The following settings are possible and changeable:
1. brightness value open slider, brightness value close slider
2. current time, switching time open slider, switching time close slider
3. do not open outside temperature for slide valve
4. switch on internal temperature for heater or fan (switch off automatically)
5. switching on the stable lighting depending on the outdoor brightness (switching off takes place automatically)
6. start "sunrise" in the morning / start "sunset" in the evening
The main display shows the following states and values:
1. day and time / software version
in alternation with
2. day and time / temperature outside* , temperature inside*, open or closed, status light sensor
Further status displays are provided by LEDs in different colours.
The PHB2-RG is designed for connection to 12 V DC and has reverse polarity protection. The internal clock is battery-buffered and continues to run even if the supply voltage fails. The set data are stored in the system and are available immediately even after a power failure and subsequent return. The PHB2-RH initializes itself automatically after power supply and remembers the last state before the failure of the supply voltage. This is taken up again when the power supply returns.
The following functions can be set on the integrated menu-driven display:
- PHB2-RG closes and opens only by timer, not by light sensor
- PHB2-RG closes and opens by light sensor only, not by time
- PHB2-RG closes and opens only by light sensor + adjustable closing time delay
- PHB2-RG closes and opens via timer and light sensor
- PHB2-RG closes and opens via timer or light sensor
- PHB2-RG closes and opens manually with pushbutton or radio remote control or in combination with timer and/or light sensor
- Automatic heating of the barn when the temperature falls below a selectable indoor temperature. The heating is switched off when an adjustable upper heating temperature is reached. Both infrared heating lamps and electric radiators can be used as heat sources. These devices are supplied with 230V AC and require the additional connection unit JT-Rel-HL from JOSTechnik.
- Automatic ventilation of the barn if a selectable indoor temperature is exceeded. The ventilation is switched off when an adjustable lower ventilation temperature is reached. Devices with 12V DC operating voltage as well as 230V AC can be used as fans/fans. For 230V devices the additional connection unit JT-Rel-HL from JOSTechnik is required.
The device can be used both outdoors and indoors. The plug-in power supply unit is only suitable for indoor use. Operation of the external devices requires a 230V mains connection.
Mounting:
PHB2AE-RG Frame with drive unit can be fixed to the wall above the opening hole using the 4 screws supplied. Control unit without fixing material ) can be mounted anywhere.
The total height when the flap is completely open is approx. twice the flap length!
* Depending on the installation location of the device, both together only with additional remote temperature sensor (to be ordered separately).
Scope of delivery:
- Poultry House Butler PHB2AE-RG - Control unit with temperature sensor, timer and coiled pull cord ( without fixing material )
- Fixed frame with drive unit in its own housing with integrated self-locking goose flap ( width x length ) 230 x 340 mm Dimensions of the frame : width 370 mm, length 840 mm, height 65 mm
- Power supply 230 V / 12 V DC (approved for indoor use!), Ordernumber: 476
- Fixing material 4 screws and dowels each only for drive unit on frame
Connections for external remote display are provided!
Attention: This item is not a standard product and is custom-made. According to § 312g para. 2 no. 1 of the German Civil Code (BGB), this item is excluded from the right of withdrawal.Download the operating instructions according to the instructions on the invoice and read them through before putting into operation!!!!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:528;s:14:"products_price";s:8:"226.0504";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836269";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:14;a:17:{s:14:"products_model";s:3:"605";s:13:"products_name";s:72:"HK-Bat-RG frame device - goose flap 340x550mm + circuit attraction light";s:17:"products_quantity";i:10;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"605_0.jpg";s:15:"products_weight";s:5:"2.260";s:26:"products_short_description";s:329:"for battery operation for 4xAA batteries or power supply 6V DC oroptional with solar kit from JOSTechnik .
Automatic HK-BAT chicken coop door opener with plug-in power supply and door/sliding gate! The HK-BAT automatic chicken coop door opener from JOSTechnik, which can also be called an automatic actuator or electronic gatekeeper, automatically opens and closes chicken or poultry coop doors or vertical sliding gates via a pull cord according to light or time.
The sensitivity of the light sensor can be set to different levels for light and darkness.
The batteries last about 1 year and more, depending on the quality and manufacturer. The battery icon in the standard indicator of the display flashes when the charge of the batteries is below 25%. The use of rechargeable batteries is not recommended.
The HK-BAT opens and closes automatic flaps at the poultry and chicken coop, aviary or small animal enclosure by dusk or time or in combination of both.
Real emergency stop or emergency opening function:
If an animal is under the door when it closes, the motor will automatically stop upon contact and the door will open again immediately. The closing operation is then automatically repeated. Unlike with other manufacturers’ products, no animal has to free itself from the weight of the door!
This function can be deactivated in the settings.
The HK-BAT won’t open during a storm (in the case of lightning). 230V /12V DC plug-in power supply (certified for indoor use!).
Optional connectivity:
The following functions can be set on the integrated display:
Date and time:
Languages:
Mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
Attraction light:
Trailing for self-locking flaps:
Emergency stop:
Mounting instructions
If the unit is installed indoors or if the installation location is shaded, an external outdoor light sensor is required. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover fastening.Scope of delivery
Dimension frame:
Due to the manufacturing process, there may be slight scratches on the aluminium parts of the flaps, which do not impair the functionality and therefore do not represent a defect!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:605;s:14:"products_price";s:8:"148.7395";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047835804";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:15;a:17:{s:14:"products_model";s:3:"609";s:13:"products_name";s:75:"HK-Bat + goose flap 340x550mm - battery operated - light to attract poultry";s:17:"products_quantity";i:17;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"609_0.jpg";s:15:"products_weight";s:5:"2.160";s:26:"products_short_description";s:0:"";s:20:"products_description";s:5281:"for battery operation for 4xAA batteries or power supply 6V DC oroptional with solar kit from JOSTechnik .
Automatic HK-BAT chicken coop door opener with plug-in power supply and door/sliding gate! The HK-BAT automatic chicken coop door opener from JOSTechnik, which can also be called an automatic actuator or electronic gatekeeper, automatically opens and closes chicken or poultry coop doors or vertical sliding gates via a pull cord according to light or time.
The sensitivity of the light sensor can be set to different levels for light and darkness.
The batteries last about 8 months, depending on the quality and manufacturer. The battery icon in the standard indicator of the display flashes when the charge of the batteries is below 25%. The use of rechargeable batteries is not recommended.
The HK-BAT opens and closes automatic flaps at the poultry and chicken coop, aviary or small animal enclosure by dusk or time or in combination of both.
Real emergency stop or emergency opening function:
If an animal is under the door when it closes, the motor will automatically stop upon contact and the door will open again immediately. The closing operation is then automatically repeated. Unlike with other manufacturers’ products, no animal has to free itself from the weight of the door!
This function can be deactivated in the settings.
The HK-BAT won’t open during a storm (in the case of lightning). 230V /12V DC plug-in power supply (certified for indoor use!).
Optional connectivity:
The following functions can be set on the integrated display:
Date and time:
Languages:
Mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
Attraction light:
Trailing for self-locking flaps:
Emergency stop:
Mounting instructions
If the unit is installed indoors or if the installation location is shaded, an external outdoor light sensor is required. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover fastening.
This prevents moisture from getting into the enclosure.
The cable between the fastening nut and the motor rewind must be guided vertically out of the enclosure to the flap or a pulley. Diagonal pull must be avoided.
The connecting cable between the flap actuator and the flap is not included in the scope of delivery, except for the frame unit.
Scope of delivery
Due to the manufacturing process, there may be slight scratches on the aluminium parts of the flaps, which do not impair the functionality and therefore do not represent a defect!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:609;s:14:"products_price";s:8:"130.2521";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047835866";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:16;a:17:{s:14:"products_model";s:3:"613";s:13:"products_name";s:54:"HK-Bat + goose flap 340x550mm with self-locking device";s:17:"products_quantity";i:20;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"613_0.jpg";s:15:"products_weight";s:5:"2.600";s:26:"products_short_description";s:0:"";s:20:"products_description";s:5290:"for battery operation for 4xAA batteries or power supply 6V DC oroptional with solar kit from JOSTechnik .
Automatic HK-BAT chicken coop door opener with plug-in power supply and door/sliding gate! The HK-BAT automatic chicken coop door opener from JOSTechnik, which can also be called an automatic actuator or electronic gatekeeper, automatically opens and closes chicken or poultry coop doors or vertical sliding gates via a pull cord according to light or time.
The sensitivity of the light sensor can be set to different levels for light and darkness.
The batteries last about 8 months and more, depending on the quality and manufacturer. The battery icon in the standard indicator of the display flashes when the charge of the batteries is below 25%. The use of rechargeable batteries is not recommended.
The HK-BAT opens and closes automatic flaps at the poultry and chicken coop, aviary or small animal enclosure by dusk or time or in combination of both.
Real emergency stop or emergency opening function:
If an animal is under the door when it closes, the motor will automatically stop upon contact and the door will open again immediately. The closing operation is then automatically repeated. Unlike with other manufacturers’ products, no animal has to free itself from the weight of the door!
This function can be deactivated in the settings.
The HK-BAT won’t open during a storm (in the case of lightning). 230V /12V DC plug-in power supply (certified for indoor use!).
Optional connectivity:
The following functions can be set on the integrated display:
Date and time:
Languages:
Mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
Attraction light:
Trailing for self-locking flaps:
Emergency stop:
Mounting instructions
If the unit is installed indoors or if the installation location is shaded, an external outdoor light sensor is required. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover fastening.
This prevents moisture from getting into the enclosure.
The cable between the fastening nut and the motor rewind must be guided vertically out of the enclosure to the flap or a pulley. Diagonal pull must be avoided.
The connecting cable between the flap actuator and the flap is not included in the scope of delivery, except for the frame unit.
Scope of delivery
Due to the manufacturing process, there may be slight scratches on the aluminium parts of the flaps, which do not impair the functionality and therefore do not represent a defect!
";s:19:"products_extra_text";s:0:"";s:11:"products_id";i:613;s:14:"products_price";s:8:"154.6218";s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047835828";s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:18:"manufacturers_name";s:13:"JOSTechnik UG";s:16:"manufacturers_id";i:10;}i:17;a:17:{s:14:"products_model";s:3:"620";s:13:"products_name";s:73:"HK3 with goose flap 340x550mm and integrated circuit for attraction light";s:17:"products_quantity";i:20;s:21:"products_shippingtime";i:8;s:14:"products_fsk18";i:0;s:14:"products_image";s:9:"620_0.jpg";s:15:"products_weight";s:5:"2.000";s:26:"products_short_description";s:440:"The HK3 opens and closes automatic flaps on poultry and chicken coops, aviaries or small animal enclosures at dusk or time or in a combination of both.
Real emergency stop or emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Optional connection options:
The following functions can be set on the integrated display:
Date and Time:
Menu - Languages:
Operating mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
o Opening time for morning. Flap is opened when it is light and the set opening time has been reached. Both conditions must apply.
o Closing time delay for evenings. The flap is closed when it gets dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
o One of the set conditions for twilight or time must be reached.
o Lighting conditions are ignored.
o The set % value of the light sensor must be reached. The flap then closes immediately or after the set closing time delay
o Open and close with button
attract light:
An external outdoor light sensor is required for indoor installation or if the installation location is in the shade. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover attachment.
This way no moisture can get into the housing. Assembly instructions on anleitung-jt.de
scope of delivery
The HK3 opens and closes automatic flaps on poultry and chicken coops, aviaries or small animal enclosures at dusk or time or in a combination of both.
Real emergency stop or emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Self-locking:
The flap is equipped with a self-locking mechanism. The JOS Technik chicken door locks itself when closed. An animal such as a fox, marten, etc. cannot push up this flap! If the flap is attached on the inside, it cannot be pushed up by people from the outside, making it more secure against theft! The self-locking works with all flap actuators from JOS Technik. The motor requires a certain follow-up time for the bolt to close completely. This run-on time can be set in the settings.
Optional connection options:
The following functions can be set on the integrated display:
Date and Time:
Menu - Languages:
Operating mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
o Opening time for morning. Flap is opened when it is light and the set opening time has been reached. Both conditions must apply.
o Closing time delay for evenings. The flap is closed when it gets dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
o One of the set conditions for twilight or time must be reached.
o Lighting conditions are ignored.
o The set % value of the light sensor must be reached. The flap then closes immediately or after the set closing time delay
o Open and close with button
attract light:
An external outdoor light sensor is required for indoor installation or if the installation location is in the shade. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover attachment.
This way no moisture can get into the housing. Assembly instructions on anleitung-jt.de
scope of delivery
Variant selection with and without emergency power module NSM
Goose flap / flap actuator frame device
The HK3 opens and closes automatic flaps on poultry and chicken coops, aviaries or small animal enclosures at dusk or time or in a combination of both.
Real emergency stop or emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Self-locking:
The frame device is equipped with a self-locking mechanism. The JOS Technik chicken flap locks itself when closed. An animal such as a fox, marten, etc. cannot push this flap up!
Optional connection options:
The following functions can be set on the integrated display:
Date and Time:
Menu - Languages:
Operating mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
o Opening time for morning. Flap is opened when it is light and the set opening time has been reached. Both conditions must apply.
o Closing time delay for evenings. The flap is closed when it gets dark and when the set closing time delay (in minutes) has been reached or expired. Both conditions must apply.
o One of the set conditions for twilight or time must be reached.
o Lighting conditions are ignored.
o The set % value of the light sensor must be reached. The flap then closes immediately or after the set closing time delay
o öffnen und schlie