Control up to 2 flaps with a single flap actuator.
The set of the multi-barn system includes the HK3 chicken flap with circuit for attracting light and 1 additional HKM drive. These open and close flaps either by setting from the HK3 or with remote buttons.
The main system HK3 and the drive units HKM are connected via a special 4-wire cable or the cheaper variant, a network cable Cat 5 or higher (without plug), whereby 2 wires must always be used together. Cable not included, please order separately.
Real emergency stop or emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Optional connection options:
The following functions can be set on the integrated display:
Date and Time:
Menu - Languages:
Operating mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
time and light
time or light (+ delay time)
Just time
Light only (+ delay time)
Manually
attract light:
Emergency power supply NSM (can also be ordered as an option):
You can select the variant with emergency power supply NSM above under the price.
The emergency power module is operated with a "12V 23AE" battery. Non-rechargeable !!
The battery serves as protection against failure in the event of a power loss. If the main supply fails, all devices close the flaps with the help of the batteries.
When the power supply is restored, HK3 and HKM restart and are ready for operation. All settings are retained.
assembly instructions
An external outdoor light sensor is required for indoor installation or if the installation location is in the shade. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover attachment.
This way no moisture can get into the housing. Assembly instructions on anleitung-jt.de
Drive unit HKM:
The settings for opening and closing the flaps on the HKM drive units are made in the HK3.
With the external drive units HKM, an HK3 can control additional flaps. The HKM drive unit can only open and close flaps. Either by setting from the HK3 or with remote buttons.
In the event of a power failure, an emergency supply battery is only used to close the individual flaps.
The main system HK3 and the additional drive unit HKM are connected via a special 4-wire cable or the cheaper variant, a network cable Cat 5 or higher (without plug). This means that 2 wires must always be used together as one line.
Cables are not included, please order separately. The different conditions in your barn, such as the distances between the individual flaps, make it more cost-effective for you if the right lengths of cable are ordered right away.
Real emergency stop or Emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Optional connection options:
Multiple stall systems - control:
When using the flap actuator HK3 to control up to 4 external drive units, the set number of drive units is displayed. These can each be set to:
time and light
time or light (+ delay time)
Just time
Light only (+ delay time)
Manually
scope of delivery
Connecting cable not included. Please order separately.
";s:11:"products_id";i:617;s:14:"products_price";s:8:"180.6723";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:1;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:3:"655";s:15:"products_master";i:617;s:22:"products_master_status";i:1;s:12:"products_ean";s:13:"0054047836726";s:13:"products_name";s:93:"HKM - the set of HK3 and 1 drive unit for multiple stall system + emergency power modules NSM";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:0;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"655_0.jpg";s:15:"products_weight";s:5:"0.000";s:26:"products_short_description";s:1370:"
Control up to 2 flaps with a single flap actuator.
The set of the multi-barn system includes the HK3 chicken flap with circuit for attracting light and 2 additional HKM drive. These open and close flaps either by setting from the HK3 or with remote buttons.
An NSM emergency power module in each of the HK3 and the HKM drive unit is only used to close the flaps in the event of a power failure.
The main system HK3 and the drive units HKM are connected via a special 4-wire cable or the cheaper variant, a network cable Cat 5 or higher (without plug), whereby 2 wires must always be used together. Cable not included, please order separately.
Real emergency stop or emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Optional connection options:
The following functions can be set on the integrated display:
Date and Time:
Menu - Languages:
Operating mode:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
time and light
time or light (+ delay time)
Just time
Light only (+ delay time)
Manually
attract light:
Emergency power supply NSM (can also be ordered as an option):
You can select the variant with emergency power supply NSM above under the price.
The emergency power module is operated with a "12V 23AE" battery. Non-rechargeable !!
The battery serves as protection against failure in the event of a power loss. If the main supply fails, all devices close the flaps with the help of the batteries.
When the power supply is restored, HK3 and HKM restart and are ready for operation. All settings are retained.
Emergency power module NSM:
The emergency power modules are each operated with a "12V 23AE" battery. Non-rechargeable !! The battery serves as protection against failure in the event of a power loss. If the main supply fails, all devices close the flaps with the help of the batteries. When the power supply is restored, HK3 and HKM restart and are ready for operation. All settings are retained.
Assembly instructions
An external outdoor light sensor is required for indoor installation or if the installation location is in the shade. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover attachment.
This way no moisture can get into the housing. Assembly instructions on anleitung-jt.de
Drive unit HKM:
The settings for opening and closing the flaps on the HKM drive units are made in the HK3.
With the external drive units HKM, an HK3 can control additional flaps. The HKM drive unit can only open and close flaps. Either by setting from the HK3 or with remote buttons.
In the event of a power failure, an emergency supply battery is only used to close the individual flaps.
The main system HK3 and the additional drive unit HKM are connected via a special 4-wire cable or the cheaper variant, a network cable Cat 5 or higher (without plug). This means that 2 wires must always be used together as one line.
Cables are not included, please order separately. The different conditions in your barn, such as the distances between the individual flaps, make it more cost-effective for you if the right lengths of cable are ordered right away.
Real emergency stop or Emergency opening function:
If there is an animal under the slide during the closing process, the motor is automatically stopped and the flap is opened again immediately. The closing process is automatically repeated several times. No animal has to free itself under the weight of the flap, as is usual with all other manufacturers!
This feature can be disabled in the settings.
Optional connection options:
Multiple stall systems - control:
When using the flap actuator HK3 to control up to 4 external drive units, the set number of drive units is displayed. These can each be set to:
time and light
time or light (+ delay time)
Just time
Light only (+ delay time)
Manually
scope of delivery
Connecting cable not included. Please order separately.
";s:11:"products_id";i:655;s:14:"products_price";s:8:"196.6387";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:2;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:7:"2101163";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"8717511616126";s:13:"products_name";s:0:"";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:155;s:16:"manufacturers_id";i:0;s:14:"products_image";s:9:"816_0.jpg";s:15:"products_weight";s:5:"0.050";s:26:"products_short_description";s:0:"";s:20:"products_description";s:0:"";s:11:"products_id";i:816;s:14:"products_price";s:6:"1.5966";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:3;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:3:"ZsH";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0740972162879";s:13:"products_name";s:23:"Pullcord 2m with S-hook";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:10;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"319_0.jpg";s:15:"products_weight";s:5:"0.020";s:26:"products_short_description";s:265:"for connecting sliders, chicken flaps or others with flap adjusters from JOSTechnik ! The pull cord is a braided weatherproof 0.6 mm cord, which according to the manufacturer is tear-resistant up to 60 kg load.
the S-hook is very useful to hook up the flap to the gate control unit and to untie it again in a easy way
the lenght of the pullcord is 2 m
made of 2 mm thick aluminum for closing stables, e.g. B. chicken coop.
The flap locks itself when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB + PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Dimensions:
Scope of delivery:
made of 2 mm thick aluminum for closing stables, e.g. B. Duck coop.
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Duck coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
made of 2 mm thick aluminium for closing enclosures, such as a goose house for example
";s:20:"products_description";s:793:"made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap made of 2 mm thick aluminum for closing stables, e.g. goose house. As a manual goose flap or in conjunction with our flap adjusters as an automatic goose flap.
See assembly!
Technical specifications:
made of 2 mm thick aluminum for closing stables, e.g. B. Goose coop.
Flap locks itself again when closed. An animal such as a fox, marten, etc. is no longer able to push up this flap!
Locking only works together with flap actuator KS from JOS Technik from version 09/14, JT-HK, HK-ZSU, as well as Poultry House Butler PHB and PHB2... and cannot be retrofitted to existing flaps!
If the flap is attached on the inside, it cannot be pushed up by a person from the outside, making it more secure against theft!
See assembly!
Technical specifications:
JOSTechnik - Chicken flap for BIO-keeping according to guidelines.
made of 2 mm thick aluminium for closing off housing, e.g. chicken coops.
Flap size fulfils conditions according to the guidelines for BIO husbandry and animal welfare regulations!
Technical data:
Dimensions:
Scope of delivery:
Flaps are available as 2nd choice on request with up to 40% discount. A return of these 2nd choice flaps is excluded.
";s:11:"products_id";i:448;s:14:"products_price";s:7:"29.4118";s:25:"products_discount_allowed";d:15;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:11;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:3:"xxl";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:0:"";s:13:"products_name";s:51:"XXL-sized 485x740mm flap gate for small animal shed";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:7;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"327_0.jpg";s:15:"products_weight";s:5:"3.300";s:26:"products_short_description";s:116:"made of 2 mm thick aluminium for closing enclosures, such as a small animal shed for example
";s:20:"products_description";s:506:"made of 2 mm thick aluminium for closing enclosures, such as a small animal shed for example
Technical data:
Flap gate width 485 mm
Flap gate height 740 mm
Slide rail length 1130 mm
Slide rail width 25.5 mm
max. height 1480 mm
Scope of delivery:
Flap gate + 2 rails + fastening materi
JOSTechnik - LDR outdoor light sensor
The LDR outside light sensor is required as an optional accessory if the flap actuator is placed in the interior.
The outdoor light sensor is installed outside the building and connected to the flap actuator using a control line.
Cable length 1m
Available with cable lengths of 1 - 8 meters.
Compatible for JT - KS until March 31, 2017, PSD..., PHB2... and JT-HK+HK-ZSU from 2020!
Cannot be used for PDO, JT-HK up to 12/2019 or KS-SFH!
De buitenlichtsensor LDR als optioneel accessoire is nodig als het apparaat binnenshuis wordt gemonteerd. In dit geval wordt de buitenlichtsensor buiten het gebouw gemonteerd en via de besturingskabel met het apparaat verbonden. Kabellengte 1 m Compatibel met PSD..., PHB2... en HK+HK-ZSU vanaf 2020 ! Niet geschikt voor JT-HK tot 12/2019 !
Czujnik światła zewnętrznego LDR jako wyposażenie dodatkowe jest wymagany w przypadku montażu urządzenia wewnątrz pomieszczeń. W tym przypadku czujnik światła zewnętrznego jest montowany na zewnątrz budynku i podłączany do urządzenia za pomocą kabla sterującego. Długość kabla 1 m Kompatybilny z PSD..., PHB2... i HK+HK-ZSU od 2020 roku! Nie dotyczy JT-HK do 12/2019!
La sonde de luminosité extérieure LDR en tant qu'accessoire optionnel est nécessaire si l'appareil est monté à l'intérieur. Dans ce cas, la sonde de luminosité extérieure est montée à l'extérieur du bâtiment et reliée à l'appareil par le câble de commande. Longueur de câble 1 m Compatible avec PSD..., PHB2... et HK+HK-ZSU à partir de 2020 ! Non applicable pour JT-HK jusqu'au 12/2019 !
Il sensore di luce esterna LDR come accessorio opzionale è necessario se il dispositivo è montato all'interno. In questo caso, il sensore di luce esterno viene montato all'esterno dell'edificio e collegato all'unità tramite il cavo di comando. Lunghezza cavo 1 m Compatibile con PSD..., PHB2... e HK+HK-ZSU dal 2020! Non applicabile per JT-HK fino al 12/2019 !
Senzor venkovního osvětlení LDR jako volitelné příslušenství je vyžadován, pokud je zařízení instalováno uvnitř. Čidlo vnějšího světla je instalováno mimo budovu a připojeno k zařízení pomocí ovládacího kabelu. Délka kabelu 1 m Kompatibilní pro PSD ..., PHB2 ... a HK + HK-ZSU od roku 2020! Nelze použít pro JT-HK do 12/2019!
";s:11:"products_id";i:382;s:14:"products_price";s:7:"14.2857";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:14;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:6:"Taster";s:15:"products_master";i:0;s:22:"products_master_status";i:1;s:12:"products_ean";s:0:"";s:13:"products_name";s:56:"JOSTechnik - Double-push-button surface mounted 1m cable";s:19:"products_extra_text";s:3038:"
als externe drukknop voor handmatige bediening van alle automatische pluimveeflappen, maar niet voor PDO en PHB2 ... aansluiting: wit = min; bruin = open; groen = gesloten jako zewnętrzny przycisk do ręcznej obsługi wszystkich automatycznych klap dla drobiu, ale nie dla PDO i PHB2 ... . połączenie: biały = minus ; brązowy = otwarty ; zielony = zamknięty comme bouton-poussoir externe pour la commande manuelle de tous les servomoteurs de clapets, mais pas pour PDO et PHB2... raccordement: blanc = moins ; marron = ouvert ; vert = fermé come pulsante esterno per il comando manuale di tutte le alette automatiche per pollame, ma non per PDO e PHB2 ... collegamento: bianco = meno; marrone = aperto; verde = chiuso jako externí tlačítko pro ruční ovládání všech automatických klapek drůbeže, ale ne pro PDO a PHB2 ... Připojení: bílá = mínus; hnědá = zapnuto; zelená = uzavřenáConnection: white = GND minus ; brown = on 2.2. ; green = to 2.1.
Not for PDO and PHB2....
";s:20:"products_description";s:3170:"with cableas external push-button for manual operation of all damper actuators, but not for PDO and PHB2....
complete with black plastic housing with cable length 1 m
Push-button can be attached using double-sided adhesive tape or screws (drill screw holes in the bottom part of the housing) and dowels! Not included in delivery!
H = 19 mm
W = 38 mm
L = 48 mm
als externe drukknop voor handmatige bediening van alle automatische pluimveeflappen, maar niet voor PDO en PHB2 ... aansluiting: wit = Gnd min; bruin = open 2.2. ; groen = gesloten 2.1. jako zewnętrzny przycisk do ręcznej obsługi wszystkich automatycznych klap dla drobiu, ale nie dla PDO i PHB2 ... połączenie: biały = minus Gnd ; brązowy = otwarty 2.2. ; zielony = zamknięty 2.1. comme bouton-poussoir externe pour la commande manuelle de tous les servomoteurs de clapets, mais pas pour PDO et PHB2... raccordement: blanc = moins Gnd ; marron = ouvert 2.2. ; vert = fermé 2.1. come pulsante esterno per il comando manuale di tutte le alette automatiche per pollame, ma non per PDO e PHB2 ... collegamento: bianco = meno Gnd ; marrone = aperto 2.2. ; verde = chiuso 2.1. jako externí tlačítko pro ruční ovládání všech automatických klapek drůbeže, ale ne pro PDO a PHB2 ... Připojení: bílá = mínus Gnd ; hnědá = zapnuto 2.2. ; zelená = uzavřená 2.1.";s:11:"products_id";i:299;s:14:"products_price";s:7:"13.4454";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:15;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:6:"12V12W";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0740972162787";s:13:"products_name";s:51:"LED-strip-light dimmable 12W / 12V-DC (IP 65) EEK F";s:19:"products_extra_text";s:50:"893880";s:17:"products_quantity";i:57;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"461_0.jpg";s:15:"products_weight";s:5:"0.113";s:26:"products_short_description";s:340:"
Attention: Only suitable for 12 V DC !!!
";s:20:"products_description";s:2052:"for light control PLM and PLMmini from JOSTechnik and 12V light systems!
Attention: Only suitable for 12 V DC !!!
This 12 V DC LED lamp as a light bar with bracket can be dimmed without flickering with light controls from JOS Technik. Up to 3 dimmable 12W light strips can be connected directly without a relay module.
If LED components are operated directly with a perfectly smoothed DC voltage (DC voltage without significant ripple noise), these LED lamps also show a flicker value that is negligible in practice and are therefore considered flicker-free.
Technical dataSupply voltage 12 V DC
Energy efficiency category F
Socket strip light with mounting clips
Power consumption 12 W
Light flux 1 050 in Sphere (360°)
Lumen per Watt ≥ 90 lm / W
Beam angle 120°
Colour temperature 2800 - 3200 Kelvin - warm white
Colour rendering index > 81 RA
Dimmable yes
Average light bulb lifespan 50.000 hours
Average amount of switching cycles > 10.000
Dimensions (L x W x H) 340mm x 18mm x 12mm
Ignition time >0,3 s
Intensity at the end of lifespan 15 %
Temperature range -20°C - +40°C
Weighted power consumption 12,0 kWh / 1000 h
Luminous efficiency ≥ 96%
Seconds until 60% of full light flux is reached 0,58 s
Protection class IP 65
Mercury content 0,0 mg
Max. light intensity (candela) 600 cd
Proper disposal:
Lamps labelled with the WEEE symbol can be returned to suitable collection centres.
for light control of JOS Technik 12V flap actuators and for 12V lighting systems!
Attention: Only suitable for 12 V DC !!!
This 12 V DC LED lamp as a light bar with bracket can be dimmed without flickering with light controls from JOS Technik. Up to 5 dimmable 6W light strips can be connected directly without a relay module.
If LED components are operated directly with a perfectly smoothed DC voltage (DC voltage without significant ripple noise), these LED lamps also show a flicker value that is negligible in practice and are therefore considered flicker-free.
Technical dataSupply voltage 12 V DC
Energy efficiency category F
Socket strip light with mounting clips
Power consumption 6 W
Light flux 554 in Sphere (360°)
Lumen per Watt ≥ 90-100 lm / W
Beam angle 120°
Colour temperature 2800 - 3200 Kelvin - warm white
Colour rendering index > 81 RA
Dimmable yes
Average light bulb lifespan 50.000 hours
Average amount of switching cycles > 10.000
Dimensions (L x W x H) 340mm x 18mm x 12mm
Ignition time >0,3 s
Intensity at the end of lifespan 15 %
Temperature range -20°C - +40°C
Weighted power consumption 6,0 kWh / 1000 h
Luminous efficiency ≥ 96%
Seconds until 60% of full light flux is reached 0,58 s
Protection class IP 65
Mercury content 0,0 mg
Max. light intensity (candela) 600 cd
Proper disposal:
Lamps labelled with the WEEE symbol can be returned to suitable collection centres.
Ultra-bright LED lamps for status display of the flaps from JOS Technik, except HK-Bat, HK-Bat-R... , PHB, PHB2... , PHB2R...
Display LED red for open and LED green for closed!
complete with black plastic housing with cable length 1 m
Remote display can be attached using double-sided adhesive tape or screws (drill screw holes in the lower part of the housing) and dowels! Not included in the delivery!
H = 19 mm
B = 38 mm
L = 48 mm
";s:11:"products_id";i:142;s:14:"products_price";s:7:"13.4454";s:25:"products_discount_allowed";d:0;s:12:"products_vpe";i:0;s:19:"products_vpe_status";i:0;s:18:"products_vpe_value";s:6:"0.0000";}i:18;a:21:{s:14:"products_fsk18";i:0;s:23:"products_date_available";s:19:"0000-00-00 00:00:00";s:21:"products_shippingtime";i:8;s:14:"products_model";s:6:"FB4T1S";s:15:"products_master";i:0;s:22:"products_master_status";i:0;s:12:"products_ean";s:13:"0054047836290";s:13:"products_name";s:26:"Radio Remote Control JT-FB";s:19:"products_extra_text";s:0:"";s:17:"products_quantity";i:920;s:16:"manufacturers_id";i:10;s:14:"products_image";s:9:"491_0.jpg";s:15:"products_weight";s:5:"0.051";s:26:"products_short_description";s:836:"
Not for series HK-Bat and HK-Bat-R...
";s:20:"products_description";s:1714:"for manual operation of the automatic chicken flap or flap actuator PHB2 and PHB2-R... (not HK-Bat and HK-Bat-R...) . With the radio remote control JT-FB4T you can wirelessly open or close the PHB2 and PHB2-R... and / or switch the lighting on and off, but not dim it.
After operating the radio remote control to open and close the flap , a complete cycle must always be completed before the flap actuator switches back to automatic mode! If the light is switched on manually but not switched off, the lighting is automatically switched off at 11:00 p.m. when the device switches to the night time range.
When ordered together with the flap actuator devices PHB2, the radio remote control is installed. Otherwise easy to retrofit, since it is simply plugged onto the existing connection .
Not suitable if a solar energy set or batteries are selected as the power supply, as the receiver constantly draws electricity!
Scope of delivery:
Radio remote control - 4 buttons with 1 transmitter and 1 associated receiver
Outdoor range: approx. 20 - 30 m
Attention: When retrofitting , the radio remote control must be trained! See note on invoice, delivery note !!!
Not for series HK-Bat and HK-Bat-R...
";s:20:"products_description";s:1848:"for manual operation of the automatic chicken flap or flap actuator PHB2 and PHB2-R... (not HK-Bat and HK-Bat-R...) . With the radio remote control JT-FB4T you can wirelessly open or close the PHB2 and PHB2-R... and / or switch the lighting on and off, but not dim it.
After operating the radio remote control to open and close the flap , a complete cycle must always be completed before the flap actuator switches back to automatic mode! If the light is switched on manually but not switched off, the lighting is automatically switched off at 11:00 p.m. when the device switches to the night time range.
When ordered together with the flap actuator devices PHB2, the radio remote control is installed. Otherwise easy to retrofit, since it is simply plugged onto the existing connection .
Not suitable if a solar energy set or batteries are selected as the power supply, as the receiver constantly draws electricity!
Scope of delivery:
Radio remote control - 4 buttons with 2 transmitter and 1 associated receiver
Outdoor range: approx. 20 - 30 m
Attention: When retrofitting , the radio remote control must be trained! See note on invoice, delivery note !!!